8. MODIFYING PARAMETERS
No. 99MBB122A
8-25
4 Select the measurement type for the slice level, and press the
[Enter/Menu] key.
The background of the selected measurement type turns blue.
The set measurement type for the slice level switches.
5 Set the number of sections.
a Use the [ ↑ ] [ ↓ ] keys to select “Slice points”.
b Press the [Enter/Menu] key to set the number of sections.
Pressing the [Enter/Menu] key cycles through the available number
of slice points “1” or “2”.
mr(c) Setup screen
mr(c) Setup screen
mr(c) Setup screen
mr(c) Setup screen
To Next Page
Loading...
