No. 99MBB122A
8-26
6 Set the slice level.
When “slice points” is set to “2”, two slice levels can be set.
a Select “Slice level” “1” or “2” with the [ ↑ ] [ ↓ ] keys, and press the
[Enter/Menu] key.
b Input the slice level.
The input range is as follows:
0.0 to 99.9 %
0.0 to 999.9m (9999.99 in)
TIP
• The value is set to 0 when the “AC” ([Blue] key) is pressed.
• For information about numeric value entry, refer to 2.5,
“Entering Numeric Values/Characters”.
c Press the [Enter/Menu] key.
The set slice level is displayed on the setup screen for mr(c) (tp for
ANSI).
TIP
• Press the [Esc/Guide] key to return to the previous screen.
• The screen returns to the Home screen when the “Home”
([Blue] key) is pressed.
mr(c) Setup screen
Slice Level Setup screen
mr(c) Setup screen
To Next Page
Loading...
