No. 99MBB122A
14-1
14 INSTALLING THE SJ-210
WITH OPTIONAL
ACCESSORIES
This chapter explains the optional accessories for the easy setting of
workpieces.
Various optional accessories are offered for the SJ-210 so that it can measure a curved
(cylindrical, etc.) workpiece or a workpiece with a measured surface smaller than the size
of the SJ-210.
Support feet Nosepiece for flat surface Nosepiece for cylinder
Adapter for vertical application Extension rod Adapter for magnetic stand
Adapter for height gage
NOTE
• The following optional accessories explained in this chapter cannot be used for
transverse tracing type drive/detector units:
Support feet, nosepiece for flat surface, nosepiece for cylinder, adapter for vertical
application, and extension rod
To Next Page
Loading...
