No. 99MBB122A
14-4
■ Nosepiece for cylinder
Used to protect and guide the detector when measuring a cylindrical workpiece that the
drive/detector unit can not be placed.
Dimensions and application example
Dimensions and application example of the nosepiece for cylinder
Attaching the nosepiece for cylinder
NOTE
• When attaching the nosepiece to the drive/detector unit, exercise care so that it does
not interfere with the detector body.
1 Fit the SJ-210 detector into the slot of the nosepiece.
2 Using the supplied Allen wrench, tighten the two screws shown in the
following figure.
Attaching the nosepiece for cylinder
Support feet
Drive
Nosepiece for cylinder
Work piece
Drive
Nosepiece for cylinder
No. 12AAA218
Screw
Detector
To Next Page
Loading...
