Mitutoyo SJ-210 - Adapter for vertical application

14. INSTALLING THE SJ-210 WITH OPTIONAL ACCESSORIES
No. 99MBB122A
14-5
■ Adapter for vertical application
Used to support the drive/detector unit for measuring a vertical groove in which the
drive/detector unit can not be placed.
 Dimensions and application example
Dimensions and application example of the adapter for vertical application
 Attaching the adapter for vertical application
1 Put the SJ-210 detector through the hole of the adapter.
2 Using the supplied Allen wrench, tighten the two screws shown in the
following figure.
Attaching the adapter for vertical application
Drive
Hold down by hand.
Adapter for vertical application
Work piece
Drive
Adapter for vertical application

No. 12AAA219
Screw
Detector