No. 99MBB122A
3-20
Operation key ([POWER/DATA] key㧕
IMPORTANT
• If the instrument is forcibly turned OFF while writing to the internal memory (during
re-calibration, etc.), the data written to the memory may become invalid.
Do not suddenly switch OFF the built-in battery or unplug the AC adapter during
operation.
If the contents of the internal memory have become invalid, all settings are reset and the
following message is displayed right after the unit is turned back ON.
At this time all settings are reset to their initial values.
When this message is displayed, gain calibration and speed calibration must be
performed.
Total reset message
NOTE
• When the AC adapter is connected and the [POWER/DATA] key is pressed to turn the
power on, recharging progress indicator may appear on the display.
While the recharging progress indicator is showing, press the [POWER/DATA] key
again to turn on the power normally.
Indication condition of charge
Press
[POWER/DATA] key
again
Home screen
To Next Page
Loading...
