3. Turn the Control encoder to select a Type. Turn the Control encoder at full left to remove
any particular selection (i.e. select all Types).
4. If the selected Type contains any Sub-Types, press the Right Arrow button to select the
SUB-TYPE field, and turn the Control encoder to select a Sub-Type of the selected Type.
Turn the Control encoder at full left to remove any particular selection (i.e. to select all
Sub-Types of the selected Type).
Selecting Tags for Projects, Groups, Sounds, and Samples
When browsing Projects, Groups, Sounds or Samples, continue as follows:
â–º If the selected Sub-Type contains Sub-Types itself (these are then at the third and last
level of the Type hierarchy), press the Right Arrow button to select the SUB-TYPE #2
field, and turn the Control encoder to select a Sub-Type of the selected Sub-Type. Turn
the Control encoder at full left to remove any particular selection (i.e. to select all Sub-
Types of the selected Sub-Type).
Browser
Searching and Loading Files from the Library
MASCHINE MIKRO - Manual - 160
To Next Page
Loading...
Need help?
General
Weight and Dimensions
