→ The selected tab lights up. The name of your Project, of the focused Group or the focused
Sound appears on the display (under the MASTER, GROUP, and SOUND tabs), and the
display shows the Plug-in parameters and Channel properties of the Master, the focused
Group or the focused Sound, respectively.
3.3.6 Navigating Channel Properties, Plug-ins, and Parameter Pages in the Control Area
We describe here how to display/edit any Plug-in parameters or Channel properties located in
any Sound, Group or the Master.
To select a particular Plug-in or a particular set of Channel properties, you first need to display
the parameters of the Master, the desired Group or Sound.
1. To display the parameters of a particular Group or Sound, put it in focus by clicking it in
the Group List or Sound List, respectively (see section ↑3.3.4, Focusing on a Group or a
Sound).
2. In the top left corner of the Control area, click the MASTER, GROUP or SOUND tab to
display the parameters of the Master, the focused Group or the focused Sound, respec-
tively.
→ The Control area now displays the Plug-in parameters and Channel properties of the de-
sired Sound, desired Group or the Master.
Selecting Channel Properties
1. At the far left of the Control area, click the Channel icon (showing a little knob) to display
the Channel properties:
The button lights up. The Channel Property selector appears in the left part of the Control
Basic Concepts
Common Operations
MASCHINE MIKRO - Manual - 84
To Next Page
Loading...
Need help?
General
Weight and Dimensions
