Parameter Modulation Destination
Cutoff Cutoff parameter of the FILTER section (with filter types LP2, HP2,
BP2 only) on the FX / Filter page (page 3).
Volume This allows you to modulate the volume, which is what velocity
normally is used for.
MODWHEEL DESTINATION
Here you can determine how incoming MIDI data sent by the Modulation Wheel affects various
parameters.
Parameter Modulation Destination
Start Start parameter of the PITCH / GATE section on the Pitch / Envelope
page (page 2).
Cutoff Cutoff parameter of the FILTER section (with filter types LP2, HP2,
BP2 only) on the FX / Filter page (page 3).
LFO Depth Use this knob to adjust how much the Modulation Wheel affects the
depth of the LFO modulation (for all targets) defined on the LFO
page (page 5).
Pan Pan parameter on the Audio page of the Sound’s Output properties
(see ↑12.1.2, Configuring the Main Output of Sounds and Groups for
more information).
7.3 Using Native Instruments and External Plug-ins
MASCHINE allows you to load VST/AU plug-ins from Native Instruments (Native Instruments
Plug-ins) or any third-party manufacturer (External Plug-ins) and to use them like the MA-
SCHINE Internal Plug-ins.
As with Internal Plug-ins, the following rules apply for loading Native Instruments and External
Plug-ins:
â–ª An Instrument Plug-in can be loaded only in the first Plug-in slot of a Sound.
Working with Plug-ins
Using Native Instruments and External Plug-ins
MASCHINE MIKRO - Manual - 333
To Next Page
Loading...
Need help?
General
Weight and Dimensions
