Parameter Description
Source Here you can select the modulation source of the Phaser:
available options are LFO, LFO Sync, and Envelope. Depending
on your selection, the parameter to the right will change.
Speed (LFO) Defines the speed of the LFO in a range from 0.03 Hz up to
8 Hz.
Speed (LFO Sync) Defines the speed of the LFO in note values from 16/1 (one
cycle every 16 bars) up to 1/16 note.
Shape (Envelope) Change the shape of the envelope here.
Stereo This parameter widens the stereo field of the effect.
OUTPUT Section
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
The Phaser on the controller.
15.4 Spatial and Reverb Effects
15.4.1 Ice
This is a special reverb for getting cold and metallic sound. Ice includes a bank of self-oscillat-
ing filters for interesting and colorful effects. In the Project “Come Into My Disco” from the
MASCHINE factory library, you can hear how it creates deep soundscapes during the break in
Scene 6.
Effect Reference
Spatial and Reverb Effects
MASCHINE MIKRO - Manual - 701
To Next Page
Loading...
Need help?
General
Weight and Dimensions
