9.1 Drumsynths – General Handling
This section describes the general use and features of the Drumsynths.
Managing Drumsynths
Drumsynths are MASCHINE Plug-ins and, as such, they support all usual Plug-in actions and
procedures. Hence, to know how to load, remove, replace, insert, move, copy/paste Drum-
synths, as well as how to adjust the Drumsynth parameters and load/save presets, please refer
to section ↑7.1, Plug-in Overview, where these are described in detail.
9.1.1 Engines: Many Different Drums per Drumsynth
Each of the available Drumsynths (Kick, Snare, Hi-hat, Tom, and Percussion) actually provides
many different drums: Indeed, each Drumsynth allows you to select a particular engine for gen-
erating the drum sound. In the same Drumsynth each engine will have its own algorithm, pa-
rameters, and sonic characteristics — it is in fact an entirely distinct drum. For example, the
Kick provides eight different engines! Some engines will create acoustic drums while others
will rather produce electronic sounds.
In each Drumsynth the first parameter (Engine) lets you select the engine you want to use.
Most of the other parameters will depend on the selected engine.
9.1.2 Common Parameter Organization
All Drumsynths have a similar parameter organization, both in the Control area of the Arrange
view and in the Plug-in Strip of the Mix view.
Common Parameter Pages in the Control Area (Arrange View)
In Arrange view, the parameters of all Drumsynths are grouped in similar ways in the Control
area:
Using the Drumsynths
Drumsynths – General Handling
MASCHINE MIKRO - Manual - 358
To Next Page
Loading...
Need help?
General
Weight and Dimensions
