Native Instruments Maschine Mikro MK2 User Manual

12.1.4 Configuring the Master and Cue Outputs of MASCHINE
All channels routed to the Master are mixed together and processed by the Plug-ins loaded in
the Master, if any. The result is then sent to the Master output (that is, MASCHINE’s main out-
put).
Besides, all channels currently routed to the Cue bus for pre-listening are mixed together and
sent to the Cue output.
For more information on how to use the Cue bus, see section ↑13.2.6, Using the Cue Bus.
You can choose to which outputs (on your audio interface or in your host) both Master and Cue
outputs should be sent, and adjust their respective levels and panoramic positions. This is
done on the Audio page of the Output properties for the Master.
The Audio page of the Output properties for the Master in the software.
The AUDIO page of the Output properties for the Master on the controller.
Please refer to section ↑3.3.6, Navigating Channel Properties, Plug-ins, and Parameter Pages in the
Control Area to know how to access the Audio page of the Output properties in the software and
from your controller.
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE MIKRO - Manual - 562

Native Instruments Maschine Mikro MK2 Specifications

General

Mixer section	No
Product color	Black
Backlight buttons	Yes
USB direct playback	-
Apple docking compatibility	Not supported
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64

Weight and Dimensions

Depth	195 mm
Width	320 mm
Height	50 mm
Weight	1200 g