Tube Mode – Parameter Description
Charge In Tube mode the Saturator provides a negative feedback loop
that attenuates the level at the Saturator’s input according to
the amount of low frequencies at its output. This notably
prevents the bass content “polluting” the saturation. The
Charge parameter allows you to adjust the amount of feedback.
At 0 (full left) the feedback loop is disabled. Increase the
Charge value to strengthen the effect. Higher values additionally
generate an interesting compression-like effect.
Overload Boosts the low frequencies of the input signal. Used together
with the Charge parameter (see above) it provides you with a
powerful tool to produce a richer, fatter sound.
Drive Adjusts the level of the input signal. This directly affects the
amount of tube distortion.
EQ Section
Bypass Enable this button to bypass the EQ section.
Bass Adjusts the level of the low frequency band.
Treble Adjusts the level of the high frequency band.
OUTPUT Section
Gain Adjusts the output level of the effect. Use this to compensate
for changes in volume caused by input gain and signal
compression.
15.7 Perform FX
Designed for spontaneous, tactile control in recording or live performance, these eight complex
multi-effects alter motion, space, dynamics, and more for added expression.
▪ Filter: The Filter is a raw-sounding, analog-modelled LP/BP/HP filter with additional satura-
tion parameters and resonance that can be pushed into self-oscillation. For more informa-
tion see section ↑15.7.1, Filter.
Effect Reference
Perform FX
MASCHINE MIKRO - Manual - 732
To Next Page
Loading...
Need help?
General
Weight and Dimensions
