(2) PADS section: Access the various controller modes using the column of mode buttons on
the left-hand side of this section. Pads 1-16 allow you to play the Sounds of the selected
Group. For more information on this section please view PADS Section.
(3) TRANSPORT section: Start, stop and restart playback, activate record and skip bars while
playing, simply by pressing the dedicated buttons. Use SHIFT to access the secondary func-
tions of your controller. For more information on this section please view TRANSPORT Section.
2.3.1.1 CONTROL Section
This section gives an overview of the CONTROL section.
Overview of the CONTROL section.
(1–3) F1, F2 and F3 buttons: The three buttons above the LCD display dynamically adapt their
function to the active mode, allowing direct access to the most important sub-sections and
functions. The action they will perform is shown below each button in the display. Using the
SHIFT button you can also use F1 to access MIDI mode and F2 to access Instance mode:
â–ª MIDI mode: In this mode you can use MASCHINE MIKRO MK2 as a MIDI controller. Press
SHIFT + F1 to access MIDI mode. For more details, please refer to the Controller Editor
manual.
Quick Reference
MASCHINE Hardware Overview
MASCHINE MIKRO - Manual - 45
To Next Page
Loading...
Need help?
General
Weight and Dimensions
