ton (2) to switch between the Map view and the Sample view (the Sample view is visible when
the Sample View button is enabled). The Map and Sample views are explained in detail in sec-
tion ↑17.5.4, Selecting and Editing Zones in the Map View and ↑17.5.5, Editing Zones in the
Sample View, respectively.
(6) Zone settings: Displays the parameters for the focused Zone. See section ↑17.5.6, Adjusting
the Zone Settings for a detailed description of the available parameters.
17.5.3 Selecting and Managing Zones in the Zone List
The Zone List shows all Zones of the focused Sound.
The Zone List in the Zone page.
► Click the Zone List button next to the Slice tab to show/hide the Zone List.
The Zone List allows you to add, remove, replace, select, and reorder Zones in the list.
You can adjust the width of the Zone List by dragging its right border.
Adding a New Zone to the Zone List
You can add a new Zone to the Zone List in two ways:
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE MIKRO - Manual - 872
To Next Page
Loading...
