Element Description
EQ Section
High Cut Adjusts the high frequencies in the reverberated signal. Available
values range in kilohertz from 20.0 kHz to 2.0 kHz (default: 20.0
kHz).
Low Shelf Adjusts the low-frequency content in the reverberated signal.
Available values range in decibels from -0.0 dB to -12.0 dB
(default: -0.0 dB).
15.4.5.2 Reverb Hall
The Reverb Hall mode is a spacious and natural reverb that is particularly suited to tonal
sounds. When used with a high Reverb Time setting it provides a very lush reverb making it
also suitable for ambient or experimental music. Modulate the Room Size, and Pre Delay pa-
rameters to create special effects.
The Reverb effect in the Plug-in Strip.
Effect Reference
Spatial and Reverb Effects
MASCHINE MIKRO - Manual - 711
To Next Page
Loading...
