1. Double-click the Scene name at the top of the Song view.
You can also right-click ([Ctrl]-click on macOS) the Scene slot or the corresponding cell in
the pad grid and select Rename from the context menu.
The Scene name is highlighted and editable.
2. Type a name and press [Enter] on your computer keyboard to confirm (or press [Esc] to
cancel you change).
→ The Scene is renamed.
If you use MASCHINE as a plug-in, some hosts will utilize the [Enter] key, as it is mapped to some
function of the host software. In this case, click anywhere else in the MASCHINE plug-in window to
confirm the name you have entered.
16.3.11 Clearing Sections
Clearing a Section allows you to remove the referenced Scene, leaving the Section empty.
Clearing Sections is only available from within the software.
Working with the Arranger
Using Song View
MASCHINE MIKRO - Manual - 799
To Next Page
Loading...
