15.6.3 Saturator
The Saturator is a flexible tool allowing you to apply various types of saturations to your signal.
The Saturator offers three modes: Classic (legacy mode), Tape, and Tube. You can select the
desired mode via the Mode selector. Since the three modes provide different sets of parame-
ters, each of them is described separately below.
The Saturator panel (here in Tube mode) in the Plug-in Strip.
Classic Mode
The Classic mode is the legacy mode. It combines compression and saturation to increase the
overall loudness and add additional harmonics.
The Saturator in Classic mode in the Control area.
Classic Mode – Parameter
Description
MAIN Section
Mode Selects between Classic, Tape, and Tube saturation modes. All
other parameters vary according to the mode selected here.
Effect Reference
Distortion Effects
MASCHINE MIKRO - Manual - 729
To Next Page
Loading...
