11.7.10 Adjusting Pattern Length in Fine Increments
Patten Length can be adjusted in fine increments to create irregular pattern lengths by tempo-
rarily pressing the [Shift] button on your computer keyboard or SHIFT on the MASCHINE con-
troller while adjusting the Pattern Length. The size of fine increments are defined using the
Step Grid.
1. Press GRID and then F3 to access STEP.
2. Turn the Control encoder to select the required Step Grid size.
3. Press PATTERN.
4. Press and turn the Control encoder to adjust Pattern Length in fine increments.
→ The Pattern Length can now be adjusted in finer increments according to the value of the
Step Grid.
11.8 Importing/Exporting Audio and MIDI to/from Patterns
In the Pattern Editor you can quickly export MIDI and audio from Patterns and import MIDI to
Patterns via drag and drop.
11.8.1 Exporting Audio from Patterns
The Audio drag-and-drop function allows you to export audio from the selected Pattern onto
your desktop or into your host software by simply dragging it onto the target location or appli-
cation. This function is only available in the software.
The audio will be exported as a WAV audio file and according to the current settings of the
Export Audio panel (see section ↑5.4.3, Exporting Audio for more information on these set-
tings) with following exceptions:
â–ª The exported range will be based on the selected Pattern, regardless of the current Loop
Range. Note that the Loop Optimize setting will be respected.
â–ª The exported audio will only include the focused Group (in Group view) or the focused
Sound (in Keyboard view) — in other words it will include what you see in the Event area.
Working with Patterns
Managing Patterns
MASCHINE MIKRO - Manual - 533
To Next Page
Loading...
Need help?
General
Weight and Dimensions
