Parameter Description
Tune It allows you to transpose the Resochord in semitones.
COLOR Section
Brightness This is to determine the basic sound characteristic of the
Resochord: higher values will brighten the sound by adding high
frequencies.
Feedback Adjusts the amount of output signal fed back into the input.
Decay With Decay you adjust how fast the Resochord fades out.
OUTPUT Section
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
The Resochord on the controller.
15.6 Distortion Effects
15.6.1 Distortion
The Distortion effect contains two modes of distortion: Mullholland and Analog.
Effect Reference
Distortion Effects
MASCHINE MIKRO - Manual - 724
To Next Page
Loading...
