2. Press NAV and turn the Control encoder to select SLICE.
3. Press F1 to select EDIT mode.
4. Press SHIFT + F3 to select DEL ALL to delete all slices.
5. Press F1 (EDIT) to exit EDIT Mode.
6. Press F3 APPLY to remove the Slices from the Sound or Group.
→ All extra Slices and Keyzones will be deleted leaving just the first Keyzone in place.
17.4.4 Manually Adjusting Your Slices
In addition to the Detect, Split, Grid, and Manual modes that create Slices automatically (see
section ↑17.4.2, Adjusting the Slicing Settings above), you can also adjust Slices manually us-
ing your mouse, the waveform display, and the various edit tools at your disposal.
You can directly adjust your Slices manually by selecting Manual in the MODE selector, or start
from MASCHINE’s proposed Slices as described in section ↑17.4.2, Adjusting the Slicing Settings
and fine-adjust these Slices manually — in that case the MODE selector automatically switches to
Manual.
Sampling and Sample Mapping
Slicing a Sample
MASCHINE MIKRO - Manual - 858
To Next Page
Loading...
Need help?
General
Weight and Dimensions
