Click the arrow button at the bottom left of the Pattern Editor to show/hide the Control Lane.
Showing/Hiding the Control Lane on the Controller
â–º Press VIEW + pad 14 to show/hide the Control Lane.
3.3 Common Operations
This sections introduces a few very common operations in MASCHINE you will encounter in
numerous situations.
3.3.1 Pinning a Mode on the Controller
Besides the default Control mode, your controller has various other modes of operation, which
you can enter by pressing their dedicated buttons. Depending on their purpose and workflow,
these controller modes are of two types:
â–ª Temporary modes only stay active as long as you hold down their button on the controller.
When you release the button, your controller returns to Control mode. This is for example
the case with the MUTE button.
Basic Concepts
Common Operations
MASCHINE MIKRO - Manual - 71