Arp mode seamlessly switches to Note Repeat mode as soon as you switch your pads from Keyboard
mode to Pad Mode (see above): All current values (including the LOCK state) are retained.
6.4.5 Swing on Note Repeat / Arp Output
The Swing engines (at the Master, Group, and Sound level) process notes coming from the Pat-
tern Editor and from the Arp engine (pads in Keyboard mode) or Note Repeat engine (pads in Pad
Mode). In other terms, the swing is applied not only to your Patterns but also to any live se-
quence generated by the Arp or Note Repeat engine.
The applied swing is not recorded in the Pattern Editor. For an overview of the signal flow starting
from your pads, have a look at the diagrams in section ↑6.4.1, Overview of the Perform Features.
For example, when you play live beats on top of a running Pattern, you can use Note Repeat
without destroying the Pattern’s groove: the repeated notes will be processed using the same
swing parameters as the playing Pattern.
When the playback is not running, the swing is still applied to the output of Arp (Keyboard mode) or
Note Repeat (Pad Mode). If you press PLAY on your controller, the playback starts immediately and
the swing cycle is reset.
Playing on the Controller
Performance Features
MASCHINE MIKRO - Manual - 298
To Next Page
Loading...
Need help?
General
Weight and Dimensions
