► Drag a Sample from the Browser’s LIBRARY or FILES pane or from your operating system
onto the empty area in the Zone List.
or
1. Click the “+” at the end of the Zone List.
A Load Sample dialog opens up.
2. Navigate to the desired audio file on your operating system and press [Enter] to confirm.
→ A new Zone is created at the end of the list containing the dragged or selected Sample.
You can drag and drop several Samples at once: It will creates as many new Zones!
You can also add Zones to your Sound by dragging and dropping Samples directly onto the Sample
Map of the Map view. See section ↑17.5.7, Adding Samples to the Sample Map for more on this.
Replacing the Sample of an Existing Zone
You can also put a new Sample into an existing Zone, thereby replacing the Sample currently
contained in that Zone. Again, you have two methods at your disposal:
► Drag a Sample from the Browser’s LIBRARY or FILES pane or from your operating system
onto the desired entry in the Zone List.
or
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE MIKRO - Manual - 873
To Next Page
Loading...
Need help?
General
Weight and Dimensions
