Element Description
Gate When enabled, the decay of the drum is choked by the end of the
MIDI note. When disabled (default), the drum plays as a one-shot
sound, i.e. until the end of its tail, no matter when the note is
released.
Grit Adjusts the intensity of the bitcrushing, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 30 %).
NOISE Section
Color Adjusts the tone of the digital noise, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Amount Adjusts the level of the digital noise, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 25.0 %).
Advanced Page
For this engine the Advanced page does not contain any parameters.
Modulation Page
As with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-
ity.
Element Description
SCALE Section
Velocity Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
Using the Drumsynths
The Snares
MASCHINE MIKRO - Manual - 386
To Next Page
Loading...
Need help?
General
Weight and Dimensions
