Element Description
Decay Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Skin Tune Adjusts the fine-tuning of the skin of the drum, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
50.0 %).
Impact Adjusts how hard the drum is hit, measured as a percentage.
Available values range from 0.0 % (softest) to 100.0 % (hardest).
The default value is 75.0 %.
Advanced Page
The Advanced page contains parameters controlling the wires’ sound of the drum.
Element Description
SPECTRA Section
Mode Selects from two different noise types that simulate the wires of the
drum. Available modes are A (default) and B.
Tune Provides an independent tuning of the snare noise. It relates to the
wires tension of a real snare drum. Available values range from 0.0
to 100.0 % (default: 50.0 %).
Decay Controls the length of the snare wire sound independently from the
main Decay parameter on the Main page. Available values range
from 0.0 to 100.0 % (default: 40.0 %).
Amount Adjusts the amount of snare wire sound applied to the drum,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 75.0 %).
Modulation Page
As with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-
ity.
Using the Drumsynths
The Snares
MASCHINE MIKRO - Manual - 393
To Next Page
Loading...
Need help?
General
Weight and Dimensions
