Element Description
Decay Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Skin Tune Adjusts the fine-tuning of the skin of the drum, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
50.0 %).
Impact Adjusts how hard the drum is hit, measured as a percentage.
Available values range from 0.0 % (softest) to 100.0 % (hardest).
The default value is 75.0 %.
Body Adjusts the level of the snare body independently from level of the
snare wires, which is adjusted on the Advanced page (see below).
Available values range from 0.0 to 100.0 % (default: 75.0 %).
Advanced Page
The Advanced page contains parameters controlling the wires’ sound of the drum.
Element Description
SPECTRA Section
Mode Selects from two different noise types that simulate the snare wires
of the drum. Available modes are A (default) and B.
Decay Controls the length of the snare wires’ sound independently from
the main Decay parameter on the Main page. Available values range
from 0.0 to 100.0 % (default: 40.0 %).
Amount Adjusts the amount of snare wire sound applied to the drum,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 75.0 %).
Modulation Page
As with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-
ity.
Using the Drumsynths
The Snares
MASCHINE MIKRO - Manual - 397
To Next Page
Loading...
Need help?
General
Weight and Dimensions
