Element Description
STEP Set the amount of time shift per step. The value is applied to all
notes and will move them randomly in both plus and minus values
according to the overall percentage set here.
Time shift can be changed from +/- 0-50% in 5% increments. Press
SHIFT to change in finer increments of 1%.
DISTRIBUTIONS
NOTE COUNT
(Keyboard mode)
FIXED: The note count is fixed. The value set in the Note Count of
the CHORDS section will take precedent here.
EQUAL: The note count will be evenly distributed across the NOTE
RANGE.
GAUSS: The note count is likely to be distributed to the middle
section of the NOTE RANGE.
½ GAUSS: The note count more is likely to be distributed to the
middle and lower section of the NOTE RANGE.
NOTES
(Keyboard mode)
EQUAL: Notes will be evenly distributed across the Pattern in
accordance with the Step Grid.
GAUSS: Notes are more is likely to be distributed to the middle part
of the note range.
½ GAUSS: Notes are more likely to be distributed to the middle and
lower part of the Pattern in accordance with the Step Grid.
NOTE LENGTH FIXED: Notes will have the same length across the Pattern.
EQUAL: Note lengths will be evenly distributed across the Pattern.
GAUSS: Note lengths in the middle part of the pattern are more
likely to be shorter.
½ GAUSS: Note lengths in the middle to lower part of the pattern are
more likely to be shorter.
Working with Patterns
Editing Events
MASCHINE MIKRO - Manual - 501
To Next Page
Loading...
Need help?
General
Weight and Dimensions
