2. Open the extended view of the Mixer by clicking the down-pointing arrow on the left of the
Mixer:
Navigate to the channel of which you want to configure the output: for a Sound click the
header of its parent Group (or double-click it if the Mixer currently displays the Group
channel strips), and for a Group simply ensure that its channel strip is visible (double-
click the Group header if the Mixer currently displays the Sound channel strips).
3. To adjust the level, panoramic position or Cue state of a channel, use the channel’s fader,
balance control (above the fader) or headphone button (below the fader), respectively.
This is equivalent to setting the Level, Pan, and Cue parameters described above, respec-
tively.
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE MIKRO - Manual - 557
To Next Page
Loading...
Need help?
General
Weight and Dimensions
