Some of these parameters also affect MIDI file import: The Channel parameter of a Sound will be
used when importing a multi-channel MIDI file to its Group, while the Root Note parameter will be
used when importing a single-channel MIDI file to the Group. For more information on MIDI file im-
port please refer to section ↑11.8.3, Importing MIDI to Patterns.
If MASCHINE is running as a plug-in in a host and you have configured your Scenes to be triggered
via MIDI notes, the Scene trigger has priority over any Sound trigger set to the same MIDI channel.
To configure MIDI control for Scenes, please refer to section ↑16.5, Triggering Sections or Scenes
via MIDI.
Configuring MIDI Note Input for Sounds and Groups in Mix View
You can also easily configure the MIDI note input of your Sounds and Groups in MASCHINE’s
Mixer:
1. Click the Mix View button on the left of the Arranger to switch from Arrange view to Mix
view:
2. Open the extended view of the Mixer by clicking the down-pointing arrow on the left of the
Mixer:
Audio Routing, Remote Control, and Macro Controls
Using MIDI Control and Host Automation
MASCHINE MIKRO - Manual - 577
To Next Page
Loading...
Need help?
General
Weight and Dimensions
