MASCHINE in Stand-Alone Mode
Please make sure that you have connected an external audio signal source to your audio inter-
face and that the inputs of the audio interface are activated. To do this:
1. Select the Preferences… entry from the File menu to open the Preferences panel.
2. In the Audio page click the Input button, activate the desired inputs by clicking their field
in the Port column and selecting a physical input from the drop-down menu, then click
Close.
→ Audio signals coming from external sources plugged in the inputs selected here will now
be routed to the MASCHINE inputs shown in the first column.
Using Effects
Applying Effects to External Audio
MASCHINE MIKRO - Manual - 650
To Next Page
Loading...
