The Compressor on the controller: MAIN page.
Side-Chain Input Page
The Compressor in the Control area: Side-Chain Input page.
Parameter
Description
INPUT Section
Source Selects the audio signal you want to use as side-chain signal to
control the Plug-in. Available options are None (side-chain
disabled, default setting), the outputs of all (other) Sounds , and
the outputs of all (other) Groups.
In the menu these outputs are labeled as follows:
For Groups: [Group name] (e.g., Drums)
For Sounds: [Group name]: [Sound name] (e.g., Drums: Kick)
In the selector display these outputs are labeled as follows:
For Groups: [Group name] (e.g., Drums)
For Sounds: [Group letter+number]:S[Sound number] (e.g., A1:S4 for
the Sound 4 of Group A1)
Effect Reference
Dynamics
MASCHINE MIKRO - Manual - 669
To Next Page
Loading...
Need help?
General
Weight and Dimensions
