Element Description
INPUT Section
Source Selects the audio signal you want to use as side-chain signal to control
the Plug-in. Available options are None (side-chain disabled, default
setting), the outputs of all (other) Sounds, and the outputs of all
(other) Groups.
In the menu these outputs are labeled as follows:
â–ª For Groups: [Group name] (e.g., Drums)
â–ª For Sounds: [Group name]: [Sound name] (e.g., Drums: Kick)
â–ª In the selector display these outputs are labeled as follows:
â–ª For Groups: [Group name] (e.g., Drums)
â–ª For Sounds: [Group letter+number]:S[Sound number] (e.g., A1:S4 for
the Sound 4 of Group A1)
Gain
Adjusts the input level of the side-chain signal fed into the Plug-in.
Available values range from 0.00 dB to 1.00 (default: 1.00).
FILTER Section
Filter Activates a filter on the side-chain input. This filter can be useful to
select only a specific frequency range of the side-chain signal to
control the Plug-in. Available values are off and on (default: off).
Center Freq Adjusts the center frequency of the filter. Available values range in
kilohertz from 20.0 Hz to 20.0 kHz (default: 632.5 kHz).
On your controller the outputs available in the SOURCE parameter are labeled as in the display of
the Source selector described above.
For more information on how to use the side-chain input, please refer to section ↑14.1.3, Using the
Side-Chain Input.
Effect Reference
Dynamics
MASCHINE MIKRO - Manual - 680
To Next Page
Loading...
Need help?
General
Weight and Dimensions
