Parameter Description
HIGH-MID Section
Freq Frequency selector for the second mid-frequency band. Ranges
from 40 Hz to 16 kHz.
Gain This determines how much the selected frequency is increased/
attenuated by.
HIGH Section
Freq Frequency selector for the high frequency band. Ranges from 50 Hz
to 20 kHz.
Gain This determines how much the selected frequency is increased/
attenuated by.
The EQ on the controller: FREQ / GAIN page.
Width / Output Page
The EQ in the Control area: Width / Output page.
Effect Reference
Filtering Effects
MASCHINE MIKRO - Manual - 686
To Next Page
Loading...
