15.3.3 FM
FM modulates the frequency of the audio signal based on FM synthesis. High frequency set-
tings are useful for adding a subtle “gritty” texture to the input signal.
The FM panel in the Plug-in Strip.
FM in the Control area.
Parameter
Description
FREQ Section
Rate This is for adjusting the speed of the FM modulation.
Split The Split control determines the extent to which the FM effect
is applied to high frequencies via a crossover. Turn to the right
to affect higher frequencies. It can be useful to eliminate noise
artifacts caused by FM of very high signals.
With high Split settings, the effect becomes more “gritty” and
crackling.
Effect Reference
Modulation Effects
MASCHINE MIKRO - Manual - 697
To Next Page
Loading...
