Parameter Description
Tone Mod Modulation introduced in the feedback signal.
OUTPUT Section
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
GATE Section
Gate The Gate button is used to cancel out feedback loops
introduced by high Feedback settings.
Release This parameter determines how fast the distorted sound dies
down when the Gate is enabled.
Analog Distortion
Analog mode adds grit to Drums and Percussion, Lead Synths and Guitars.
Element Description
MODE Section
Mode Select a distortion type: Mullholland or Analog.
DISTORTION Section
Saturation Sets the amount of saturation applied to the signal. Available values
range from 0.0 to 100.0% (default: 25.0%).
Bass Attenuates the low frequencies of the distortion effect. Available
values range from 0.0 to 100.0% (default: 100.0%).
Tone Sets the frequency for the high cut filter. Filtering the harmonically
rich distorted signal produces a softer tone. Available values range
from 0.0 to 100.0% (default: 100.0%).
Focus Switches the frequency range of the processed signal, pulling it
slightly further forwards in the mix. The effect is more pronounced
when Definition is set to lower values.
Effect Reference
Distortion Effects
MASCHINE MIKRO - Manual - 726
To Next Page
Loading...
Need help?
General
Weight and Dimensions
