Main Page
Parameter Description
MODE
Mode Select an effect.
TOUCHSTRIP
Engage Activates the effect.
Frequency Controls the frequency of the filters in the filter bank, altering
the tonality of the signal.
ECHO
Time Sets the delay time.
Feedback Sets the delay feedback.
Pump Controls the amount of compression applied to the feedback
loop.
Wet Level Controls the volume of the delayed signal.
Mix Mode Sets the routing of the signal:
- In Mix mode, the dry signal is passed unprocessed and the
wet signal is added on top according to the Wet Level
parameter.
- In Insert mode, the dry signal is processed with a filter and
the wet signal is added on top. The Wet Level parameter is an
output level control for the whole effect while engaged.
- In Wet Only mode, the dry signal is muted entirely, which is
useful for placing the effect on a send.
Effect Reference
Perform FX
MASCHINE MIKRO - Manual - 742
To Next Page
Loading...
Need help?
General
Weight and Dimensions
