Section/Scene Slot MIDI Note Number Program Change Number
1 0 1
2 1 2
3 2 3
… … …
128 127 128
MIDI Note numbers: Host applications use various conventions to name MIDI notes. For example, in
MASCHINE, MIDI note number 0 is referred to as C-2 and MIDI note number 60 (middle C) as C3.
Please refer to the documentation of your host to know which convention is used.
Program Change numbers: Some host applications send Program Change numbers in the range [0–
127] instead of [1–128]. In that case, the PC number 0 will trigger Section/Scene slot 1, PC 1 will
trigger Section/Scene slot 2, etc. Please refer to the documentation of your host to know in which
range it sends Program Change numbers.
To enable or disable Section/Scene MIDI Change feature, do the following:
► Click Edit > MIDI Change from the menu.
Working with the Arranger
Triggering Sections or Scenes via MIDI
MASCHINE MIKRO - Manual - 809
To Next Page
Loading...
