438
Module / Board
System Boot/Restart Initiated
Boot Error
OS Boot
OS Stop/Shutdown
Slot/Connector
System ACPI Power State
Watchdog2
Version Change
SMI Timeout
Sensor Failure
Redundant Memory Configuration Status
FAN Boost Temperature
(2) Sensor status is displayed.
Name : Sensor name
Status : Status
Reading : Sensor value
(3) Clicking “Refresh” enables to display sensor status again.
(4) Clicking “Show Thresholds” enables to display the threshold value.
Threshold will be displayed for threshold sensors (Temperature, Voltage, Fan, and FAN
Boost Temperature). If threshold sensors have some invalid threshold, "N/A" will be
displayed in stead of threshold. In case of non -threshold sensors, "N/A" will be displayed
instead of threshold.
NOTE:
Each column in the list is re-sizable. If you put cursor on
right side of each item and you move the cross cursor to
right or left direction, you can change column size of
specific item.
If you click the triangular shape in each top column of list,
the list is sorted as ascending order. If you click the
Inverted triangle shape in each top column of list, the list
is sorted as descending.
To Next Page
Loading...
