543
SOL Console Log
It is possible to refer the newest SOL Console Log , 120,000 bytes maximum, when executing
oemnecsol command with “-c” option. Below shows the key bind.
If any escape sequences are included in the console log, the display may have disorder. If the
management firmware is rebooted, the log will be disappeared.
-> oemnecsol –c <baud rate (bps)>
Key Function
+ Go to next page
- Go back to previous page
F Jump to the oldest page
L Jump to the newest page
CTRL+B or q Return to SMASH-CLP console
? Help
・ oemnecreboot
・ Format
oemnecreboot [--force]
・ Parameter
None
・ Description
This command reboots(reset) the management firmware. Execute this command to have
the new Management firmware available after the managemern firmware is updated.
It is executable when the server is stable,while DC OFF , EFI shell or OS is running.
・ Example
-> oemnecreboot
IMPORTANT:
• Don’t use this command imprudently while the system is
operating.
• To reboot without any condition, add force option
• NEC unrecommends the firmware update rebooting to you
while the DC power is on because the application of the OS
may not work well.
To Next Page
Loading...
