544
oemnecspdump
・ Format
oemnecspdump
・ Parameter
None
・ Description
This command takes management firmware log so called SP Dump.
The maintenance person uses this command when a fauilre occurred. The log data as
uuencode format is displayed on the terminal of the software.
・ Example (taking logs. Execute on SMASH-CLP and save the terminal log as “console.log”)
-> oemnecspdump
IMPORTANT:
• Don’t use this command imprudently while the system is
operating.
• Don’t type any key while executing this command. Otherwise
the terminal log will be broken and not recoverable.
To Next Page
Loading...
