Using the Console Interface
309978-D Rev 01 3-87
Packets 64 bytes Received column: Indicates the total number of 64-byte packets received on this
port.
Transmitted column: Indicates the total number of 64-byte packets transmitted
successfully on this port.
65-127 bytes Received column: Indicates the total number of 65-byte to 127-byte packets
received on this port.
Transmitted column: Indicates the total number of 65-byte to 127-byte packets
transmitted successfully on this port.
128-255 bytes Received column: Indicates the total number of 128-byte to 255-byte packets
received on this port.
Transmitted column: Indicates the total number of 128-byte to 255-byte packets
transmitted successfully on this port.
256-511 bytes Received column: Indicates the total number of 256-byte to 511-byte packets
received on this port.
Transmitted column: Indicates the total number of 256-byte to 511-byte packets
transmitted successfully on this port.
512-1023 bytes Received column: Indicates the total number of 512-byte to 1023-byte packets
received on this port.
Transmitted column: Indicates the total number of 512-byte to 1023-byte packets
transmitted successfully on this port.
1024-1518 bytes Received column: Indicates the total number of 1024-byte to 1518-byte packets
received on this port.
Transmitted column: Indicates the total number of 1024-byte to 1518-byte packets
transmitted successfully on this port.
Frame Errors Indicates the total number of valid-size packets that were received but discarded
because of CRC errors and improper framing.
Undersized Packets Indicates the total number of packets received on this port with fewer than 64 bytes
and with proper CRC and framing (also known as short frames or runts).
Oversized Packets Indicates the total number of packets received on this port with more than 1518
bytes and with proper CRC and framing (also known as oversized frames).
Filtered Packets Indicates the number of packets filtered (not forwarded) by this port.
Flooded Packets Indicates the total number of packets flooded (forwarded) through this port
because the destination address was not in the address database.
FCS Errors Indicates the total number of valid-size packets that were received with proper
framing but discarded because of cyclic redundancy check (CRC) errors.
(continued)
Table 3-31. Port Statistics Screen Fields (continued)
Field Description
To Next Page
Loading...
Need help?
General