Nortel BayStack 450-24T - Port Configuration

Using the BayStack 450 10/100/1000 Series Switch
G-4 309978-D Rev 01
VLAN State Inactive
Port Membership U (all ports assigned as
untagged members of
VLAN 1)
VLAN Port Configuration (page 3-52) Unit 1
Port 1
Filter Tagged Frames No
Filter Untagged Frames No
Filter Unregistered Frames No
Port Name Unit 1, Port 1
PVID 1
Port Priority 0
Tagging Untagged Access
AutoPVID (all ports) Disabled
VLAN Display by Port (page 3-56) Unit 1
Port 1
PVID 1 (read-only)
Port Name Unit 1, Port 1 (read-only)
Traffic Class Configuration (page 3-57) Traffic Class Low
Port Configuration (page 3-59) Unit 1
Status Enabled (for all ports)
LnkTrap On
Autonegotiation Enabled (for all ports)
Speed/Duplex 100Mbs/Half (when
Autonegotiation is Disabled)
High Speed Flow Control
Configuration (page 3-62)
Unit 1 to 8 (depending on
configuration status)
Autonegotiation Enabled
Flow Control Disabled
(continued)
Table G-1. Factory Default Settings for the BayStack 450 Switch (continued)
CI screen Field Default setting