103
27.1. Starting the working mode
Procedure:
• While in the main window press
in the top bar, then you will see a
submenu <Working Modes> comprising a list of modes,
• Choose <
Parts counting >, program automatically returns to the
main window displaying icon
in the top bar,
• The weight unit is automatically changed to „pcs” and two screen buttons
on the right side appear:
Enter part mass
Estimate part mass
27.2. Local settings of the working mode
Local settings of the working mode < Parts counting > are accessible
on pressing a hot key <
Local parameters>:
Automatic correction
of reference mass
Detailed description in ch. 27.2.1 of the user manual
Minimum reference mass
Detailed description in ch. 27.2.2 of the user manual
Save Mode
Detailed description in ch. 25.2 of the user manual
Down-weighing
Detailed description in ch. 25.3 of the user manual
Checkweighing
Detailed description in ch. 25.4 of the user manual
Tare mode
Detailed description in ch. 25.5 of the user manual
Labelling mode
Detailed description in ch. 25.6 of the user manual
Statistics
Detailed description in ch. 25.7 of the user manual
Information abort saved
measurement
Detailed description in ch. 25.11 of the user manual
Ingredient weight entered
manually
Detailed description in ch. 25.13 of the user manual
Standard printout
Detailed description in ch. 25.12 of the user manual