95
Printing followed by zeroing label counter or the total mass
Printing without zeroing label counter or the total mass
By default setting button is accessible in the bottom part of the display
but activating the button
can be done in submenu:
„
/ Display / Actions” (see ch. 17.2).
For automatic printout cumulative labels of cumulative (CC) labels counters
and total mass variables are always zeroed.
• Confirm the changes by pressing and go to parameter
<
Threshold> then <Threshold> window appears with
the screen keyboard,
• Set the appropriate value for automatic triggering CC labels:
− If parameter < Mode> is set to <Mass> then enter the required
value of total mass to exceed in order to print the CC label,
− If parameter < Mode> is set to <Number> use the screen
keyboard to enter the required counter value as a threshold to trigger
off printing CC labels.
• Confirm the changes introduced by pressing .
25.7. Statistics
All statistics are continuously updated after each measurement is saved
in the scale memory. Statistics can be calculated globally (does not depend
on the selected product) or separately for every product from the product
database. It can be set in parameters <
Statistics>.
Procedure:
• Enter < Working modes> parameter group as described
in chapter 25 of this manual,
• Enter the required working mode and choose <
Statistics>
and then set the required option.
To Next Page
Loading...
