75
Procedure:
• Enter submenu < Others> according to ch. 21 of this manual,
• Select <
Screen timeout> submenu, <Screen timeout> editing
window with an on screen keyboard is displayed,
• Enter required time value in [s] and press button to confirm.
21.9. Log out automatically when time elapses
You can e
nable the option of automatic logging out of the operator when time
given in [min] elapses. The default value is 0 [min] (parameter disabled).
Procedure:
• Enter submenu < Others> according to ch. 21 of this manual,
• Select < Log out automatically when time elapses> parameter,
<Log out automatically when time elapses> edit box featuring an on-
screen keyboard is displayed,
• Enter respective value in [min] and press
button to confirm.
Caution:
The conditions for enabling the function after declared time are as follows:
• The weighing instrument with displayed home screen,
• The weighing instrument zero indication.
When the above conditions are met, the operator is automatically logged out
which is signalled by message: <
Operator logged out automatically>.
21.10. Permissible quantity of unsuccessful logging
The soft
ware can block operator logging in after exceeding the declared
amount of logging in attempts.
Procedure:
• Enter submenu < Others> according to ch. 21 of this manual,
• Select< Permissible quantity of unsuccessful logging> parameter,
<Permissible quantity of unsuccessful logging> edit box featuring an
on screen keyboard is displayed,
To Next Page
Loading...
