91
25.6. Labelling mode
Labellin
g mode can be initiated together with every working mode. The
labelling system is intended to print labels for marking weighed goods e.g. a
packing process. The program can print standard labels for single products,
cumulative labels for sticking to bulk containers and cumulative labels for
cumulative labels for sticking to the large transport containers holding bulk
containers.
In submenu <
Labelling mode> there are accessible following special
functions:
Number of labels
No. of cumulative labels
No. of CC labels
C label automatic triggering
CC label automatic triggering
25.6.1. Setting of the number of labels to print
In the parameter < Number of labels> user defines the amount
of labels. They are printed on the printer connected to the weight.
Procedure:
• Enter parameters group < Working Modes> according
to ch. 25 of this manual,
• Enter the required working mode and choose: „
Labelling mode /
Number of labels” then the editing field <Number of labels>
with the screen keyboard is opened,
• Choose the required number of labels and confirm by pressing
.
To Next Page
Loading...
Need help?
General
