35
16.1.4. Weighing printout template
Users in parameter < Weighing Printout Template> can define variables
included in the printout from the scale to a computer.
Procedure:
• Enter < Devices> parameter group as described in chapter 16 of this
manual,
• Choose „
Computer / Weighing Printout Template” then the
editing field <Weighing Printout Template> with the screen keyboard
appears,
• Modify the template if necessary and confirm the changes by pressing
.
Caution:
There are additional buttons in the bottom line of the screen keyboard.
They can be used while modifying a printout template.:
Screen keyboard on/off
Reading a printout template from a *.lb file (button active while
connecting a USB pen drive)
Saving printout template in a file format *.lb (option enabled on
plugging a portable data storage device to scale port)
List of variables for printout templates (see the list in APPENDIX 01
of this manual)
Clear the editing field
16.1.5. Cooperation with “E2R System”
Scales can cooperate with computer software „E2R System” that is a modular
system for complex production supervising by monitoring of weighments
processes. In order to allow the cooperation with „E2R System” enable
parameter <
E2R System>.
Caution:
The parameter <
E2R System> can be activated by an authorized service
or the manufacturer.
To Next Page
Loading...
Need help?
General
