196
Press
button to print the report using the connected printer. Press
button to go back to < SQC> working mode settings without printing
out the report.
Caution:
• In case of connection with <
E2R System> software, control process
summary does not contain question about report printout. All data is
automatically sent to the computer software in order to print the report.
• The template and example of the SQC report are to be found in ch. 36.11
of this user manual.
36.7. Abort of control - procedure
Upon control process start you can abort it at any moment by pressing
button (abort control) located in the bottom part of the process window.
This key is located in the bottom part of a process window. When the key is
pressed the following message is displayed.
To Next Page
Loading...
