36
Procedure:
• Enter < Devices> parameter group as described in chapter 16 of this
manual,
• Choose „ Computer / E2R System / System is active” and
then set an appropriate value.
Accessible settings:
- System is not active
- System is active
• If during cooperation with <
E2R System> product selection lock is
required for operators, go to parameter <
Lock selecting products>
and set its value to
.
• Active < System is active> parameter is signalled by pictogram
(top bar of the home screen).
16.1.6. Connect to EP server
The balance enables cooperation with <
Parameters editor> software.
Possibility to connect the weighing instrument and computer software with
company server (EP server) enables 'remote access' to the instrument.
Caution:
1. This function requires Internet access.
2. The function is available after setting computer port to Tcp value.
Procedure:
• Enter < Devices> menu in accordance with ch. 16 of this user manual,
• Select „ Computer / Connect to EP server”, the connection starts
automatically and is signalled by < Connecting> message,
• Establishing a connection with 'EP server' is confirmed by < Connected>
message.
To Next Page
Loading...
